CGGVS - OKIDATA OL 400/800 TONER, 4008

  • MSDS: CGGVS
  • Manufacturer: OASIS IMAGING PRODUCTS INC
  • Product Name: OKIDATA OL 400/800 TONER, 4008
  • National Stock Number: 6850-00N079117
Product Identification

Product ID:OKIDATA OL 400/800 TONER, 4008
MSDS Date:04/11/1995
FSC:6850
NIIN:00N079117
MSDS Number: CGGVS

Responsible Party
OASIS IMAGING PRODUCTS INC
20 HAMPSHIRE DR
HUDSON, NH 03051
US

Emergency Phone: 603-880-3991

Info Phone: 603-880-3991

Cage: XASXS

Contractor
OASIS IMAGING PRODUCTS INC
HUNDSON, NH 03051 US

Telephone: 800-322-6092

Cage: XASXS

Ingredients

STYRENE ACRYLIC RESIN; (STYRENE ACRYLIC POLYMER)

CAS: 26655-10-7

OSHA PEL N/K

ACGIH TLV: N/K


POLYPROPYLENE GLYCOL; (POLYOXYPROPYLENE GLYCOL)

CAS: 25322-69-4

RTECS: TR5250000

OSHA PEL N/K

ACGIH TLV: N/K


DYE

CAS: 84179-66-8

OSHA PEL N/K

ACGIH TLV: N/K


SILICA GEL; (SILICA)

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC: NONE LISTED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:MINIMAL LUNG IRRITATION MAY OCCUR
AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY DUST.

First Aid

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEEK MEDICAL
ATTENTION IF IRRITATION DEVELOPS. SKIN:WASH WITH SOAP AND WATER.
INHAL:REMOVE FROM EXPOSURE. IF NECESSARY CONSULT MEDICAL PERSONNEL.
INGEST: DILUTE STOMACH CONTENTS WITH WATER, SEEK MEDICAL ATTENTION
IF NECESSARY.

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL, FOAM OR WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE. WHEN DISPERSED
IN AIR, AS A DUST, IT CAN FORM EXPLOSIVE MIXTURES.

Accidental Release

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER.
AVOID DUST INHALTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY AREA.
Other Precautions:AVOID PROLONGED INHALATION OF EXCESSIVE DUST.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. NIOSH APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE REQUIRED UNDER NORMAL USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NORMAL CARE IN HANDLING A PARTICULATE MATERIAL.
AVOID INHALTION.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, MILD RESINOUS ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:PRODUCTS OF COMBUSTION CAN BE TOXIC
DEPENDING ON CONDITIONS. AVOID BREATHING VAPORS.

Disposal

Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
UNDER CONDITIONS WHICH CONFORM WITH ALL FEDERAL, STATE, OR LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.